Scrap Metal Recycling in Boynton Beach, FL

Sell your copper, brass, aluminum, stainless steel, and old appliances for fair per-pound prices — serving Downtown Boynton, Chapel Hill, Canyon Trails, and every Boynton Beach ZIP code.

Looking for scrap metal recycling in Boynton Beach, FL? Here’s what you need to know: bring your copper wire, brass fixtures, aluminum, steel, electric motors, or old appliances to a licensed recycler with a valid photo ID (Florida law requires it), and you’ll be paid by metal type, grade, and weight at current market rates. Prices move daily, so call +1 954-762-9100 for today’s numbers before you haul.

Boynton Beach is a working coastal city — fishing boats, marine repair shops, AC contractors, and endless home renovations. All of that work leaves behind metal: copper wiring, aluminum railings, stainless hardware, dead pool pumps, old boat parts. Instead of paying someone to haul it away, sell it. That “junk” has real per-pound value.

What We Buy From Boynton Beach Sellers

Copper Wire and Pipe

Copper is the highest-paying common scrap metal, and Boynton Beach generates plenty of it — rewiring jobs, plumbing repipes, AC changeouts. We buy:

Bare bright copper — stripped, clean wire. Top grade, top price.
#1 copper — clean pipe and heavy-gauge wire, no solder or paint.
#2 copper — roofing copper, painted pipe, soldered joints.
Insulated wire — Romex, THHN, extension cords, Christmas lights. Bring it as-is; stripping is optional.

Contractor tip: keep a bucket on every job for copper offcuts. At the end of the month, that bucket is a paycheck.

Brass, Bronze, and Marine Hardware

Here’s where Boynton Beach gets interesting. With the Boynton Beach Inlet, Oceanfront Park marina activity, and a serious boating community, marine scrap is everywhere:

Brass — marine fittings, propellers (often bronze), through-hulls, seacocks, faucets, and valves.
Bronze — boat propellers and marine hardware pay like brass or better.
Stainless steel — rails, cleats, and rigging hardware. The magnet test separates 316 marine stainless from regular steel.

Selling boat scrap? Read this first. End-of-life boats are a special category: separate the aluminum hull from stainless rails, bronze fittings, and the lead keel (if any) before you bring it in. An intact boat is hard to grade; a broken-down one prices cleanly by metal. If you’re repowering, the old outboard’s aluminum block and stainless prop are worth asking about. Marinas from the Inlet to Oceanfront Park generate this material constantly — don’t let the yard take it for free when a scrap yard will pay you.

Salt water eats metal for breakfast, which means Boynton boat owners replace hardware constantly. Old doesn’t mean worthless — corroded bronze and brass still carry strong scrap value.

Aluminum: Siding, Gutters, Boats, and More

Aluminum siding and gutters — every re-side in Chapel Hill or Canyon Trails produces hundreds of pounds.
Aluminum boats and pontoons — yes, really. End-of-life jon boats and pontoons are mostly aluminum.
Window frames, doors, and lawn furniture — South Florida homes are aluminum-heavy.
Aluminum cans — save them up; volume turns pocket change into real money.

Steel, Iron, Appliances, and Motors

Washers, dryers, stoves, water heaters, and old grills are mostly steel with copper and aluminum inside. Pool pumps, AC compressors, and garage door motors are copper-wound — we buy electric motors whole. Bring appliances intact; the yard handles the breakdown.

Electronics

Computers, servers, hard drives, and circuit boards contain recoverable metals. If you’re an office near the Boynton Beach Mall corridor clearing out old IT equipment, ask about bulk electronics handling.

How It Works: Three Steps to Getting Paid

1. Gather and roughly sort. Copper in one pile, aluminum in another, steel in a third. You don’t need perfection — but mixed loads get graded down, so sorting pays.

2. Bring your photo ID. Florida requires scrap recyclers to record a government-issued photo ID for every seller (Florida statutes). No ID, no transaction.

3. Weigh, grade, and get paid. We weigh each metal type, grade it, and pay the current market rate. One call to +1 954-762-9100 beforehand tells you today’s prices so there are no surprises.

Understanding Scrap Prices in Boynton Beach

Nobody can give you a fixed per-pound price that stays true — copper, brass, and aluminum track global markets and shift daily. What moves your number:

Grade and cleanliness — clean, sorted metal always beats dirty, mixed loads.
Metal type — copper pays multiples of steel; brass sits between copper and aluminum.
Volume — contractors bringing regular loads often do better per pound than one-off sellers.
Timing — manufacturing demand and construction cycles push prices up and down through the year.

The Institute of Scrap Recycling Industries tracks these markets nationally. Locally, your best move is a quick call for today’s rates: +1 954-762-9100.

Where Boynton Beach Scrap Comes From

Downtown Boynton & E. Boynton Beach Blvd corridor (33435): The city’s commercial spine — restaurant equipment, retail fixtures, and renovation tear-outs.
Chapel Hill & Canyon Trails (33436): Newer residential with constant AC replacements, pool equipment swaps, and remodeling scrap.
West Boynton / 33426: Warehouses and businesses along the I-95 corridor generating commercial scrap.
Near the Inlet & Oceanfront Park (33435): Marine hardware, boat parts, dock fittings — the salt-air replacement cycle never stops.

We’re at 745 NW 7th Ave, Fort Lauderdale — a straight shot up I-95 from Boynton Beach, usually under 30 minutes. Load the truck, make one trip, leave with payment.

Storm Season = Scrap Season

Boynton Beach sits squarely in hurricane territory, and every storm season leaves a trail of damaged aluminum fencing, gutters, carports, and AC condensers. After a big blow, don’t pay a hauler to dump twisted aluminum — it’s recyclable and it pays. Same for the AC condenser that finally died in September’s heat: our air conditioner recycling service recovers the copper, aluminum, and steel inside every dead unit.

For Boynton Beach Contractors and Businesses

Plumbers, electricians, HVAC companies, roofers, and marine repair shops: your scrap stream has value. Our commercial scrap metal recycling program serves Boynton Beach businesses with regular pickups of job-site and shop scrap. Copper offcuts, aluminum duct, old condensers, stainless trim — sorted at the source, sold on schedule, tracked by load.

Keep a designated scrap area on every job. Train the crew to separate copper from steel. At month’s end, what used to be dumpster fees becomes a check. Businesses near the Boynton Beach Mall, the Congress Avenue corridor, and the industrial pockets west of I-95 are all in our service area.

Old Cars, Trucks, and Boats

Got a dead vehicle taking up driveway space? Our junk car buying covers Boynton Beach — cars are mostly steel with copper wiring harnesses, aluminum wheels, and radiators. And yes, we’ll talk to you about end-of-life aluminum boats too. If it floats, drives, or did once — ask us.

How to Get the Most Money for Your Scrap

A few habits separate the sellers who get top dollar from the ones who leave money on the table:

Keep copper dry and clean. Corroded copper grades lower. If your pipe sat in a puddle for a month, wipe it down — surface grime can cost you a grade.

Separate by grade, not just by metal. Bare bright wire in one bucket, insulated in another, copper pipe in a third. Mixed copper gets priced as the lowest grade in the mix.

Don’t mix steel with non-ferrous. A single steel bracket tossed in with your brass fittings drags the whole pile’s perceived quality down. The magnet test takes seconds.

Time larger loads strategically. If you’re a contractor sitting on a growing pile, watch for strong market weeks — but don’t hoard for months waiting for a peak nobody can predict. Steady selling beats perfect timing.

Bring it during the week if you can. Weekends are busier; weekday mornings mean faster turnaround at the scale.

What We Can’t Accept

We do not take TVs, monitors, or CRT displays. Catalytic converters from the public are also off the table — Florida law restricts converter purchases to licensed auto businesses with proper documentation. Tires, household garbage, and heavily contaminated loads belong elsewhere.

Frequently Asked Questions

How much is scrap copper worth per pound in Boynton Beach?

It changes daily with the market. Bare bright copper pays the most, then #1, then #2 and insulated wire. Call +1 954-762-9100 for today’s rate — any number older than today is just a guess.

Where is the closest scrap yard to Boynton Beach?

Fort Lauderdale Scrap at 745 NW 7th Ave, Fort Lauderdale — under 30 minutes up I-95 from most of Boynton Beach. Open Monday–Saturday 7 a.m.–6 p.m., Sundays and holidays 9 a.m.–1:30 p.m.

Do I need an ID to sell scrap metal in Florida?

Yes. Florida law requires a valid government-issued photo ID for every scrap sale, recorded by the recycler. Bring it every time.

What metals pay the most at a scrap yard?

Copper first (bare bright at the top), then brass and bronze, then aluminum and stainless steel. Steel and iron pay less per pound but add up fast in bulk.

Can I sell insulated copper wire, or should I strip it first?

Sell it as-is. We buy insulated wire and grade it by copper recovery. Stripping is labor-intensive and only worth it for very large quantities of thick wire.

Do scrap yards in Boynton Beach buy junk cars?

We do — our junk car service covers Boynton Beach. Cars, trucks, and even aluminum boats have scrap value in their steel, copper, and aluminum.

What are scrap yard hours on Saturday?

We’re open Saturdays 7:00 a.m. to 6:00 p.m. — full hours, so weekend cleanouts work fine.

How is stainless steel priced vs. regular steel?

Stainless pays more than regular carbon steel because of its nickel and chromium content. The magnet test helps: most stainless is non-magnetic or only slightly magnetic, while regular steel grabs a magnet hard.

Can I bring a mixed load of everything at once?

Yes — one trip with copper, aluminum, steel, and appliances is fine. We’ll sort and grade each metal separately at the scale. Rough pre-sorting on your end just speeds things up and protects your grades.

Do you buy lead or other unusual metals?

We handle common scrap streams — copper, brass, aluminum, stainless, steel, motors, and electronics. For unusual materials, call +1 954-762-9100 first and describe what you’ve got; we’ll tell you straight whether it’s something we can take.

Visit Us From Boynton Beach

Fort Lauderdale Scrap — 745 NW 7th Ave, Fort Lauderdale, FL 33311. Under 30 minutes up I-95. Hours: Mon–Sat 7:00 a.m.–6:00 p.m.; Sun & holidays 9:00 a.m.–1:30 p.m. Call +1 954-762-9100 for today’s prices or visit fortlauderdalescrap.com.